Welcome to Beihai Huawei Trading Co., Ltd!
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
News Center
HUAWEI TRADING
Metal hangers and plastic hangers than which is better
Release time:
2024/01/12
Plastic hangers are mainly made of ABS plastic. The shapes of plastic hangers are mainly divided into two types. One is a flat and long frame body and a relatively narrow frame shoulder supporting surface. The inclination of this kind of hanger is relatively small and the shape is relatively thin. This kind of hanger is more suitable for drying some light clothes, while the other is just the opposite of the above, this kind of hanger has a wide and short body frame, and the inclination of the shoulder frame at both ends is relatively wide and thick, which is very suitable for hanging heavy clothes.
Plastic hangers are mainly made of ABS plastic. The shapes of plastic hangers are mainly divided into two types. One is a flat and long frame body and a relatively narrow frame shoulder supporting surface. The inclination of this kind of hanger is relatively small and the shape is relatively thin. This kind of hanger is more suitable for drying some light clothes, while the other is just the opposite of the above, this kind of hanger has a wide and short body frame, and the inclination of the shoulder frame at both ends is relatively wide and thick, which is very suitable for hanging heavy clothes.
The raw materials of plastic hangers are relatively common, and the price is not relatively cheap, and the raw materials of plastic hangers are relatively light, very convenient to take and put, and the color is rich, so you can choose at will. The bad place is that the bearing weight of plastic clothes is not very large, and it is relatively simple to bend and deform during use, which will pollute the environment during production. After the use of plastic clothes hangers for a long time, the gloss of plastic clothes hangers will be worn out soon. 3. There are many kinds of metal hangers, only according to the original data can be divided into: wire hangers, stainless steel hangers, aluminum hangers, copper hangers, etc., according to the structure of a brief classification, can be divided into single wire metal hangers and double wire metal hangers. The metal hanger is very robust and used, so it has a long service life, and the texture of the metal hanger always gives people a noble and fashionable feeling, and can accept heavier clothes without deformation.
drying rack correct shopping method:
1. Look at the raw materials
Generally, the choice of a good hanger depends on the raw material of the hanger. It is not recommended to buy a metal hanger with defective data. This kind of hanger is very rusty and cannot accept the weight of many clothes. Therefore, it is necessary to look at the raw material and check the certificate of relevant data.
The. Look at the function
At present, most of the drying racks on the market are hand-cranked or floor-mounted. With the progress of the society, intelligent electric integrated drying racks have been produced. Compared with ordinary drying racks, integrated drying racks have the functions of intelligent remote control, active lifting, timing drying, light wave sterilization, LED lighting, stop upon resistance, etc.
Contact Information
Address: Room 608, Floor 6, Building 3, West Coast International Labor Union, Golden Coast Avenue, Beihai City, Guangxi
Focus on us